WH ROV Subsea Chain Hoist

The Hackett ROV compatible SS-C4 anti-corrosion subsea chain hoists meet and exceed the requirements of international standards

British Standard BS EN13157:2004 + AI:2009
American Standard ASME B30.16-2012
Australian Standard AS1418.2-1997
South African Standard SANS 1594:2007
NORSOK R-002: 2017.

William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of its specialist subsea range to the offshore sector and translated this technology to the newly developed second generation range of Hackett ROV SS-C4 anti-corrosion subsea chain hoists.
These hoists can be supplied in the following configurations

Chain block working load limit capacities available: 3.2t, 5t, 10t, 15t and 20t multi fall units
Single hook suspension unit
Hot stab interface ISO 13628-8 3/8” BSP.1 Hot stab female receptacle.
Fishtail direct drive interface
D-link drive
High performance waterproof grease giving superior rust and corrosion protection that will not separate, cake or wash out.
Specialist subsea brake material
Lightweight sturdy handles using 316L stainless steel.
Operating temperature range -40°C to +55°C
Stainless steel fixing and fasteners.

All the above hoist configurations can also be supplied with the following options

Calibrated Grade T (8) load chain to BS EN818-7 zinc plated
Calibrated Grade S (6) 316L stainless steel load chain
Complies with the Lifting Equipment Engineers Association ‘Code of Practice for Selection, Management, Use, Maintenance and Examination of Hand Chain Hoists and Lever Hoists in The Offshore Environment including Subsea’. Doc. Ref. LEEA 033 dated July 2014.

Features

500hrs + protection against salt spray tests according to ASTM B117
Twin pawls as standard - captivated internally to prevent damage
Heavy duty forged safety catches
Stainless steel fixing used throughout the hoist
Hook housing is bolt connected using cap head screws and nyloc nuts
All internal hoist components fully corrosion protected
Compact and robust design for easy handling

Performance and Testing
The Hackett ROV SS-C4 chain hoists have been fully tried and tested to include:

Minimum Breaking Load - a minimum of 4 x the WLL
The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears

SPECIFICATIONS

Product Code	WLL tonnes	A mm	B mm	C mm	D mm	E mm	Load Chain Dia. mm	No. of Falls	Max Torque Nm	Revs/300mm travel	3m weight HOL out of water kg	Extra Weight per M kg
022.R.300.H1.P	3.2	384	516	292	520	43	10.0	1	45	54	61.0	2.2
022.R.300.F1.P	3.2	507	516	292	520	43	10.0	1	45	54	41.0	2.2
022.R.500.H1.P	5.0	384	516	292	600	51	10.0	2	45	108	67.5	4.4
022.R.500.F1.P	5.0	507	516	292	600	51	10.0	2	45	108	47.5	4.4
022.R.1000.H1.P	10.0	384	516	292	760	53	10.0	4	50	165	117.0	8.8
022.R.1000.F1.P	10.0	507	516	292	760	64	10.0	4	50	165	97.0	8.8
022.R.1500.H1.P	15.0	414	516	292	1000	80	10.0	6	50	330	158.0	13.2
022.R.1500.F1.P	15.0	537	516	292	1000	80	10.0	6	50	330	139.0	13.2
022.R.2000.H1.P	20.0	429	600	292	1150	80	10.0	8	55	430	225.0	17.6
022.R.2000.F1.P	20.0	552	600	292	1150	80	10.0	8	55	430	205.0	17.6

Product Range

WH ROV Subsea Chain Hoist

SPECIFICATIONS

Product Information

Image Library

related products

ROV Eye Sling Hook

Stop Press

William Hackett Newsletter April 2021

Contact Details