William Hackett Universal Beam Clamps meet and exceed the requirements of the following International Standards:
ASME B30.20 Chapter 6 Clamps and EN13155:2020.
The William Hackett Universal Beam Clamp has been designed for vertical use, and side load applications, where conventional clamps are not.
The Universal Beam Clamp is suitable for pulling and lifting at angles across the beam or as a semi-permanent anchor point.
It can be loaded at any angle and eliminates the use of spreader beams in various lifting operations.
Fitted with an adjustable locking mechanism, ensuring secure clamping to the beam.
Built-in suspension point for low headroom design.
Lightweight design allowing for quick clamping and unclamping.
Our 10.0 tonne extra wide clamp is designed to accommodate a range of beam widths and thicknesses.
Part Code |
WLL tonnes |
A mm |
B mm |
C mm |
D mm |
E mm |
F mm |
G mm |
Beam |
Beam Width mm |
Mass kg |
028.200 | 2.0 | 450.0 | 203 | 22.5 | Ø58 | 32.5 | 118 | 16 | 25.4 | 76-204 | 9.5 |
028.320 | 3.2 | 550.0 | 235 | 28.0 | Ø60 | 33.0 | 133 | 20 | 25.4 | 125-204 | 14.7 |
028.500 | 5.0 | 618.5 | 270 | 37.5 | Ø75 | 36.0 | 157 | 24 | 25.4 | 125-305 | 28.3 |
028.1000 | 10.0 | 618.5 | 270 | 35.0 | Ø80 | 36.0 | 225 | 44 | 25.4 | 125-305 | 37.8 |
028.1000.E | 10.0 | 700.0 | 298 | 38.0 | Ø80 | 70.0 | 230 | 44 | 40.0 | 225-405 | 47.0 |
William Hackett Lifting Products Ltd - Alnwick
01665 604200
liftingsales@williamhackett.co.uk
view location
William Hackett Chain Products Ltd - Cradley
01384 569431
chainsales@williamhackett.co.uk
view location