ROV Chain Block
Subsea Chain Blocks complete with ROV interfaces
- Available as 3.0 Tonne Single Fall and 10 Tonne Three Fall Units with Grade 100 calibrated Load Chain
- The lightweight aluminium multi-function ROV friendly handle is designed to fit in four ways making the hoist adaptable to use both vertically and horizontally
- The units come fully certified and fitted with the exact height of Lift of chain as required for any individual project allowing for precise planning of manoeuvres
- All blocks come fitted with the tried and tested Subsea friction disc used in the Hackettshark Lever hoist range
- These design factors make the Hackettshark ROV Chain Block as light and as quick to operate as achievable whilst maintaining the highest safety factors
- 3-D models available on request
| Capacity (tonne) | A mm | B mm | C mm | D mm | E mm | F mm | G mm | H Hydraulic Motor | H Fish Tail | H Torque Tool |
|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 360 | 240 | 360 | 430 | 850 | 97.5 | 550 | 350 | 570 | 370 |
| 10 | 360 | 240 | 360 | 430 | 850 | 165 | 660 | 350 | 570 | 370 |
| Capacity (tonne) | Max Torque (Nm) | Revs 300mm/Travel | Mass Kg Hydraulic Motor | Mass Kg Fish-Tail | Mass Kg Torque-Tool | Load Chain Size(mm) | Load Chain No.of-Falls |
|---|---|---|---|---|---|---|---|
| 3 | 45 | 55 | 32 | 31 | 35 | 10 | 1 |
| 10 | 50 | 165 | 52 | 51 | 56 | 10 | 3 |
- print page
-
-
Download a pdf brocure for
ROV Chain Block here
